FEP Resin (DS610) for wire insulation layer, tubes, film and automotive cable
FEP DS610 Series are the melt-processible copolymer of tetrafluoroethylene and hexafluoropropylene without additives that meets the requirements of ASTM D 2116. FEP DS610 Series have good thermal stability, outstanding chemical inertness, good electrical insulation, non-aging characteristics, exceptional dielectric properties, low flammability, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption and excellent weather resistance.
Conformable with Q/0321DYS003
Technical Indexs
| Item | Unit | 610A | 610B | Test Method/Standards |
| Appearance | / | Translucent particle,with impurities such as metal debris and sand,containing visible black particles percentage point less than 1% | HG/T 2904 | |
| Melting Index | g/10min | 5.1-8.0 | 8.1-12.0 | ASTM D2116 |
| Tensile Strength,≥ | MPa | 22 | ASTM D638 | |
| Elongation at break,≥ | % | 310 | ASTM D638 | |
| Relative Gravity | / | 2.12-2.17 | ASTM 792 | |
| Melting Point | ℃ | 265±10 | ASTM D4591 | |
| Dielectric Constant(106Hz),≤ | / | 2.15 | ASTM D1531 | |
| Dissipation Factor(106Hz),≤ | / | 7.0×10-4 | ASTM D1531 | |
| Heat Stress Cracking Resistance | / | / | HG/T 2904 | |
| MIT≥ | cycles | / | ASTM/D2176 | |
Application
Extrusion processed for generic type resin, mainly used for wire insulation layer, tubes, film and automotive cable.
Attention
The processing temperature should not exceed 420℃, to prevent toxic gas from releasing.
Package, Transportation and Storage
1.Packed in plastic bag of 25kgs net each.
2.Stored in clean, cool and dry places,to avoid contamination from foreign substances such as dust and moisture.
3.Nontoxic, noninflammable, inexplosive, no corrosion, the product is transported according to non-dangerous product.
