OEM Factory for Fep 105 - FEP Resin (DS602&611) – Huaxia Shenzhou
OEM Factory for Fep 105 - FEP Resin (DS602&611) – Huaxia Shenzhou Detail:
FEP DS602 & DS611 Series are the melt-processible copolymer of tetrafluoroethylene and hexafluoropropylene without additives that meets the requirements of ASTM D 2116. FEP DS602 & DS611 Series have good thermal stability, outstanding chemical inertness, good electrical insulation, non-aging characteristics, exceptional dielectric properties, low flammability, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption and excellent weather resistance.
Conformable with Q/0321DYS003
Technical Indexs
| Item | Unit | DS602 | DS611 | Test Method/Standards |
| Appearance | / | Translucent particle,with impurities such as metal debris and sand,containing visible black particles percentage point less than 1% | HG/T 2904 | |
| Melting Index | g/10min | 0.8-2.0 | 2.1-5.0 | ASTM D2116 |
| Tensile Strength,≥ | MPa | 28 | 26 | ASTM D638 |
| Elongation at break,≥ | % | 320 | 310 | ASTM D638 |
| Relative Gravity | / | 2.12-2.17 | ASTM 792 | |
| Melting Point | ℃ | 265±10 | ASTM D4591 | |
| Dielectric Constant(106Hz),≤ | / | 2.15 | ASTM D1531 | |
| Dissipation Factor(106Hz),≤ | / | 7.0×10-4 | ASTM D1531 | |
| Heat Stress Cracking Resistance | / | Crackless | HG/T 2904 | |
| MIT≥ | cycles | / | ASTM/D2176 | |
Application
DS611:Heat stress cracking resistant plastics, mainly for wire insulation layer and thin-walled tube.
DS602:The low melting index resin and heat stress cracking resistant moulding plastic, used for stress cracking resistant requiring and low or medium speed processing, mainly for heat shrinkable tubes, pumps, valves, piping and lining, wire insulation layer.
Attention
The processing temperature should not exceed 420℃, to prevent toxic gas from releasing.
Package, Transportation and Storage
1.Packed in plastic bag of 25kgs net each.
2.Stored in clean, cool and dry places, to avoid contamination from foreign substances such as dust and moisture.
3.Nontoxic, noninflammable, inexplosive, no corrosion, the product is transported according to non-dangerous product.
Product detail pictures:
Related Product Guide:
The corporation upholds the philosophy of "Be No.1 in high quality, be rooted on credit rating and trustworthiness for growth", will continue to serve outdated and new consumers from home and overseas whole-heatedly for OEM Factory for Fep 105 - FEP Resin (DS602&611) – Huaxia Shenzhou , The product will supply to all over the world, such as: Nairobi, Malaysia, Angola, With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and solutions and good service for domestic and international customers.
By Alberta from Swiss - 2018.06.18 19:26
Speaking of this cooperation with the Chinese manufacturer, I just want to say"well dodne", we are very satisfied.
By Cora from Angola - 2018.09.19 18:37
