OEM/ODM Factory Thermoplastic Fluoropolymer - FEP Resin (DS602&611) – Huaxia Shenzhou
OEM/ODM Factory Thermoplastic Fluoropolymer - FEP Resin (DS602&611) – Huaxia Shenzhou Detail:
FEP DS602 & DS611 Series are the melt-processible copolymer of tetrafluoroethylene and hexafluoropropylene without additives that meets the requirements of ASTM D 2116. FEP DS602 & DS611 Series have good thermal stability, outstanding chemical inertness, good electrical insulation, non-aging characteristics, exceptional dielectric properties, low flammability, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption and excellent weather resistance.
Conformable with Q/0321DYS003
Technical Indexs
| Item | Unit | DS602 | DS611 | Test Method/Standards |
| Appearance | / | Translucent particle,with impurities such as metal debris and sand,containing visible black particles percentage point less than 1% | HG/T 2904 | |
| Melting Index | g/10min | 0.8-2.0 | 2.1-5.0 | ASTM D2116 |
| Tensile Strength,≥ | MPa | 28 | 26 | ASTM D638 |
| Elongation at break,≥ | % | 320 | 310 | ASTM D638 |
| Relative Gravity | / | 2.12-2.17 | ASTM 792 | |
| Melting Point | ℃ | 265±10 | ASTM D4591 | |
| Dielectric Constant(106Hz),≤ | / | 2.15 | ASTM D1531 | |
| Dissipation Factor(106Hz),≤ | / | 7.0×10-4 | ASTM D1531 | |
| Heat Stress Cracking Resistance | / | Crackless | HG/T 2904 | |
| MIT≥ | cycles | / | ASTM/D2176 | |
Application
DS611:Heat stress cracking resistant plastics, mainly for wire insulation layer and thin-walled tube.
DS602:The low melting index resin and heat stress cracking resistant moulding plastic, used for stress cracking resistant requiring and low or medium speed processing, mainly for heat shrinkable tubes, pumps, valves, piping and lining, wire insulation layer.
Attention
The processing temperature should not exceed 420℃, to prevent toxic gas from releasing.
Package, Transportation and Storage
1.Packed in plastic bag of 25kgs net each.
2.Stored in clean, cool and dry places, to avoid contamination from foreign substances such as dust and moisture.
3.Nontoxic, noninflammable, inexplosive, no corrosion, the product is transported according to non-dangerous product.
Product detail pictures:
Related Product Guide:
Well-run equipment, professional sales team, and better after-sales services; We are also a unified big family, everyone stick to the company value "unification, dedication, tolerance" for OEM/ODM Factory Thermoplastic Fluoropolymer - FEP Resin (DS602&611) – Huaxia Shenzhou , The product will supply to all over the world, such as: Czech, Pakistan, Austria, We will supply much better products with diversified designs and professional services. We sincerely welcome friends from over the world to visit our company and cooperate with us on the basis of long-term and mutual benefits.
By Katherine from Slovenia - 2018.12.11 14:13
A good manufacturers, we have cooperated twice, good quality and good service attitude.
By Bess from America - 2018.06.12 16:22
