Short Lead Time for Fep Np 40 - FEP Resin (DS602&611) – Huaxia Shenzhou
Short Lead Time for Fep Np 40 - FEP Resin (DS602&611) – Huaxia Shenzhou Detail:
FEP DS602 & DS611 Series are the melt-processible copolymer of tetrafluoroethylene and hexafluoropropylene without additives that meets the requirements of ASTM D 2116. FEP DS602 & DS611 Series have good thermal stability, outstanding chemical inertness, good electrical insulation, non-aging characteristics, exceptional dielectric properties, low flammability, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption and excellent weather resistance.
Conformable with Q/0321DYS003
Technical Indexs
| Item | Unit | DS602 | DS611 | Test Method/Standards |
| Appearance | / | Translucent particle,with impurities such as metal debris and sand,containing visible black particles percentage point less than 1% | HG/T 2904 | |
| Melting Index | g/10min | 0.8-2.0 | 2.1-5.0 | ASTM D2116 |
| Tensile Strength,≥ | MPa | 28 | 26 | ASTM D638 |
| Elongation at break,≥ | % | 320 | 310 | ASTM D638 |
| Relative Gravity | / | 2.12-2.17 | ASTM 792 | |
| Melting Point | ℃ | 265±10 | ASTM D4591 | |
| Dielectric Constant(106Hz),≤ | / | 2.15 | ASTM D1531 | |
| Dissipation Factor(106Hz),≤ | / | 7.0×10-4 | ASTM D1531 | |
| Heat Stress Cracking Resistance | / | Crackless | HG/T 2904 | |
| MIT≥ | cycles | / | ASTM/D2176 | |
Application
DS611:Heat stress cracking resistant plastics, mainly for wire insulation layer and thin-walled tube.
DS602:The low melting index resin and heat stress cracking resistant moulding plastic, used for stress cracking resistant requiring and low or medium speed processing, mainly for heat shrinkable tubes, pumps, valves, piping and lining, wire insulation layer.
Attention
The processing temperature should not exceed 420℃, to prevent toxic gas from releasing.
Package, Transportation and Storage
1.Packed in plastic bag of 25kgs net each.
2.Stored in clean, cool and dry places, to avoid contamination from foreign substances such as dust and moisture.
3.Nontoxic, noninflammable, inexplosive, no corrosion, the product is transported according to non-dangerous product.
Product detail pictures:
Related Product Guide:
Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" as well as the theory of "quality the basic, believe in the 1st and management the advanced" for Short Lead Time for Fep Np 40 - FEP Resin (DS602&611) – Huaxia Shenzhou , The product will supply to all over the world, such as: Korea, Mexico, Cyprus, Aiming to grow to be by far the most professional supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal goods. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. Detailed data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're going to allow you to get complete acknowledge about our items and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.
By Elvira from Paraguay - 2018.05.13 17:00
Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
By Dominic from San Francisco - 2018.06.03 10:17
